Every Alternative.

Fuel Performance Specification.

Cummins Westport natural gas engines can operate on CNG, LNG, or biomethane which meet Cummins published fuel specifications.

The minimum methane number requirement for the C, B, B Gas International, and L Gas Plus engines is 65 or greater. The ISL G requires a minimum methane number of 75 or greater.

To ensure the fuel you are using meets the required specifications, we've provided an online calculator for your reference. This specification covers the natural gas fuel requirements for the following Cummins Westport automotive spark ignited natural gas engine models:

ISL G  •  L Gas Plus  •  C Gas Plus  •  B Gas Plus  •  B Gas International (BGI)

To use this online calculator, fill in the Fuel Composition values so that the total equals 100%. The Results will be calculated automatically. Methane Number, Lower Heating Value, and Sulfur Content criteria must be met to pass a given fuel for a specific engine. Contact your Cummins Westport representative for complete details on the fuel standard and fuel testing specifications.

Methane CH4 %
Ethane C2H6 %
Propane C3H8 %
Butane C4H10 %
Pentane C5H12 %
Hexane C6H14 %
Heptane C7H16 %
Octane C8H18 %
Carbon Dioxide CO2 %
Nitrogen N2 %
Oxygen O2 %
Sulfur S2 %
Total (must be 100%)
%
Methane Number:
ISL G:
(minimum: 75)
L Gas, C Gas, B Gas, BGI:
(minimum: 65)
Lower Heating Value:
(minimum: 16,100 BTU/lbm)
Sulfur Content:
(maximum: 0.001% by weight)
NOTES:
  1. This specification applies to fuel as delivered to engine regardless of whether its origin was liquid or gaseous.
  2. Gas with chlorine additives is not permitted.
  3. The fuel shall not contain water, dust, sand, dirt, oils, or any other substance/component in an amount that is detrimental to the operation of the engine.